Structural performance of split orthogonal beam joints in continuous beam‐type circular concrete‐filled steel tubular beam‐to‐column connections

Abstract

AbstractA continuous beam‐type connection has been proposed as a new type of concrete‐filled steel tubular beam‐to‐column connection without a diaphragm exhibits good seismic performance. However, in a 2‐way configuration, the performance of the connection in a direction orthogonal to the continuous beam may be suboptimal due to beam splitting. In this study, a new detail of a split orthogonal beam joint was proposed and 4 specimens were constructed and tested under quasi‐static conditions. All the specimens attained the full‐plastic flexural strength for the beams and exhibited a stable inelastic behavior. The specimen in which the depth of the orthogonal continuous beam was 100 mm greater than that of the split beam exhibited good inelastic cyclic behavior, whereas two other specimens with a split beam exhibited slipping and pinching. Minor fractures were observed in the tube wall; however, the strength and stiffness did not deteriorate significantly, though a slight pinched hysteresis was observed. In addition, a finite element analysis was conducted. The split beam was largely rotationally constrained by the bearing pressure of the concrete above and/or below the beam flange. If the split beam's flange was sufficiently inserted into the connection panel, the stiffness and strength were ensured.