Structural, optical and photoluminescence properties of hybrid metal–organic halide perovskite thin films prepared by a single step solution method

Abstract

We report an inexpensive single step solution method to produce hybrid organic–inorganic lead iodide perovskite thin films for their application to photovoltaic devices. Using PbI2 and CH3NH3Cl (MACl) as precursors for this single step solution method, CH3NH3PbI3 (MAPbI3) mixed with a small amount of CH3NH3PbCl3 (MAPbCl3) can be obtained after an annealing process at temperatures around 100 °C for 2 h. The synthesis of the obtained hybrid halide perovskites yields uniform films with reproducible properties. The films were characterized by X-ray diffraction (XRD), Raman spectroscopy, UV–Vis spectroscopy and photoluminescence (PL). The XRD measurements confirm the presence of cubic CH3NH3PbCl3 perovskite crystallites mixed with tetragonal perovskite crystallites of CH3NH3PbI3 in the films with crystallite sizes for the latter around 34.8 nm. Texture analysis indicates that these crystallites have a preferential orientation at the (002) plane. Raman characterization shows the presence of PbI2 and MAPbI3 vibrational modes. Photoluminescence at room temperature shows an intense emission peak at 1.61 eV associated to the excitonic transition energy of the hybrid lead iodide perovskites. From optical transmittance measurements we notice that the absorption edge is around 1.61 eV, in good agreement with the photoluminescence results. This effective band gap energy is associated with a small amount of CH3NH3PbCl3 (around 6%) mixed with CH3NH3PbI3 crystallites. We are in the process of optimizing the photoelectronic and structural properties of the films for their application as inexpensive absorbing layers in solar cells.