Abstract
AbstractPhenalkamine, the Mannich reaction products from cardanol, formaldehyde, and polyamines were prepared using ethylene diamine, diethylene triamine and triethlene tetraamine. These products were characterized by high‐pressure liquid chromatography (HPLC), infrared spectroscopy, and nuclear magnetic resonance spectroscopy (1H NMR). Clearly resolved peaks due to presence of triene, diene, monoene, and saturated side chain containing species of cardanol were observed in HPLC. The presence of characteristic methylene linkages of Mannich bases at δ 3.5–4.0 ppm was observed by 1H NMR. These curing agents were reacted with diglycidyl ether of bisphenol‐A at room temperature and the curing times were optimized. The cured resins showed good adhesion with different metal surfaces particularly higher values were observed with copper due to its high surface energy. The viscoelastic properties of the cured samples were determined by dynamic mechanical thermal analysis. The storage modulus (E′) was found to be in the order of 109 Pa and tan δ values are around 90°C. A reduction in storage modulus (E′) and an increase in tan δ values on postcuring were observed. Thermogravimetry analysis showed two‐stage degradation above 250°C for the cured samples. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4741–4748, 2006
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
