Abstract

Two series of glasses belonging to the ternary system Na2O - CuO - P2O5 where copper is introduced differently were synthesized by the conventional melt-quenching technique. Both series start from meta-phosphate composition NaPO3 (50Na2O-50P2O5). In the first series, the Na2O/P2O5 ratio is constant (Na2O/P2O5=1) and both Na2O and P2O5 oxides were replaced by copper oxide CuO: (50-x/2) Na2O - xCuO - (50-x/2) P2O5, 0≤x≤40. In the second series, the molar percentage of P2O5 is kept constant at 50mol% and Na2O is replaced by CuO: (50-x)Na2O – xCuO – 50P2O5, 0≤x≤50. The glasses of these two series belong respectively to NaPO3-CuO and NaPO3-Cu(PO3)2 lines of the ternary system. These materials were characterized by density measurements, differential scanning calorimetry (DSC), X-ray diffraction (XRD), Raman, diffuse reflectance and dissolution heat measurements carried out with micro-calorimetry technique. Introduction of copper in meta-phosphate glass induces a blue/green color, and strengthens the vitreous network, as shown by the decrease of the molar volume (VM) and the increase of the glass transition temperature (Tg) when the content of CuO rises. The crystallization of the glasses, followed by XRD, leads to the formation of NaPO3, Na2CuP2O7 or Na2Cu(PO3)4 depending on the composition. Raman spectroscopy shows the conservation of the metaphosphate chains for NaPO3-Cu(PO3)2 glasses characterized by a constant O/P ratio (O/P=3) and the depolymerization of these chains for NaPO3-CuO glasses where O/P ratio varies from 0 to 3.67. UV - visible study showed that the optical energy gap decreases by increasing the CuO concentration. Calorimetric study of the dissolution of glasses in acid solution shows a decrease of the dissolution enthalpy, for both series, when the CuO content increases. The dissolution phenomenon is endothermic for glasses with low content in CuO (x<30) and exothermic for glasses rich in CuO.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call