Abstract
The composition, structure, and tribological characteristics at 20 °C and 500 °C of coatings obtained by the vacuum arc deposition method using a MAX phase Ti2AlC based cathode were investigated. These characteristics were compared to those of titanium nitride coating. It was shown that at a potential of -50 V, a composite coating of TiC and Ti3AlC phases forms. Meanwhile, at a potential of -100 V, a composite consisting of TiC and α-Ti is formed. At 20 °C, the friction coefficient and specific wear rate of these coatings in contact with a ball made of ShKh15 steel under a load of 2 N are comparable to those of TiN coating. At 500 °C, the wear resistance of the composite (TiC+α-Ti) coating is twice as high as that of TiN coatings. There was no clear correlation between microhardness and the tribological characteristics of the coatings.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
