Abstract

Artificial superlattices of ferroelectric Bi0.5Na0.5TiO3 and BaTiO3 have been successfully grown on (001) insulator or conductive SrTiO3 substrates by pulsed laser deposition. In these epitaxial layered structures, the BaTiO3 layers were shown to contribute to an improvement of the two dimensional growth of the Bi0.5Na0.5TiO3 layers. The influence of the superlattice period Λ, between 5 and 20 nm, was investigated. We observe an increase in the in-plane tensile strain as Λ is reduced from 20 nm to 10 nm, accompanied by a decrease in the density of dislocations. A concomitant enhancement of the dielectric permittivity was measured, demonstrating the strain tunability of these superlattices. A significant reduction of the dielectric losses is also obtained with decreasing Λ. Furthermore, a minimum value of the coercive field of less than 70 kV/cm, close to that of Bi0.5Na0.5TiO3 bulk ceramics, was reached by decreasing the period. We demonstrate that the dielectric and ferroelectric properties can be explained as the result of the in-plane tensile strain which contributes to improve the structural properties in the superlattices.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.