Stress–strain curves for steel-fiber reinforced concrete under compression

Abstract

Steel-fiber reinforced concrete is increasingly being used day by day as a structural material. The complete stress–strain curve of the material in compression is needed for the analysis and design of structures. In this experimental investigation, an attempt has been made to generate the complete stress–strain curve experimentally for steel-fiber reinforced concrete for compressive strength ranging from 30 to 50 MPa. Round crimped fibers with three volume fractions of 0.5%, 0.75% and 1.0% (39, 59, and 78 kg/m3) and for two aspect ratios of 55 and 82 are considered. The effect of fiber addition to concrete on some of the major parameters namely peak stress, strain at peak stress, the toughness of concrete and the nature of the stress–strain curve is studied. A simple analytical model is proposed to generate both the ascending and descending portions of the stress–strain curve. There exists a good correlation between the experimental results and those calculated based on the analytical model. Equations are also proposed to quantify the effect of fiber on compressive strength, strain at peak stress and the toughness of concrete in terms of fiber reinforcing parameter.