Abstract
Abstract Stress corrosion cracking (SCC) behavior of two 13Cr steels was investigated in aqueous CO2-H2S environments. U-bend tests, constant load tensile tests, and corrosion tests were performed in CO2 environments containing different amounts of H2S. In addition, the slow strain rate tensile (SSRT) tests and hydrogen absorption measurements were done under cathodic hydrogen charging conditions to determine why 13Cr steels are more susceptible to SCC in H2S environments than low alloy steels are. The 13Cr steels were less resistant to SCC in the CO2-H2S environments than low alloy steels were, but some 13Cr steels were not subject to SCC even at a hydrogen sulfide partial pressure of 0.3 atm. Furthermore, it was found that SCC in a CO2-H2S environment was caused by hydrogen embrittlement and that the SCC susceptibility of 13Cr steels was affected by their intergranular cracking behavior. Thus, their microstructures and carbide dispersions are important factors in defining SCC susceptibility of 13Cr steels.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.