Abstract

Zygomatic implants for toothless, atrophic posterior maxilla are effective treatment options and it is known that graft use has a positive effect on the zygomatic implant stability with this treatment option. The aim of this study was to evaluate the stress values and their distribution at zygomatic implant-supported prosthetic infrastructure in augmented and non-augmented models. In this study, the three-dimensional finite element method was used and 2 zygomatic implants (47.5 × 4.0 mm), 2 conventional implants (13 × 3.75 mm) and atrophic maxilla with augmented and non-augmented maxillary sinus with prosthetic infrastructure, were modelled. A vertical load of 150 N was applied onto the maxillary model at 4 different regions (#9, #12, #14 and #15). The von Mises stress, which is produced as a result of loading of zygomatic implants and prosthetic infrastructure has been evaluated in augmented and non-augmented models. The highest von Mises stress value for the prosthetic infrastructure was determined in the non-augmented model as a result of the loading to region #9 (MPa 222,886). Consequently, grafting procedures will increase bone support and reduce stresses in the prosthetic substructure, especially in posterior loads in the maxilla with low bone density.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call