Abstract

At transpulmonary pressures (Ptp) of 7-12 cmH2O, pressure-volume hysteresis of isolated cat lungs has been found to be 20-50% larger than predicted from their amount of stress adaptation (J. Hildebrandt, J. Appl. Physiol. 28: 365-372, 1970). This behavior is inconsistent with linear viscoelasticity and has been interpreted in terms of plastoelasticity. We have reinvestigated this phenomenon in isolated lungs from 12 Wistar rats by measuring 1) the changes in Ptp after 0.5-ml step volume changes (initial Ptp of 5 cmH2O) and 2) their response to sinusoidal pressure forcing from 0.01 to 0.67 Hz (2 cmH2O peak to peak, mean Ptp of 6 cmH2O). Stress adaptation curves were found to fit approximately Hildebrandt's logarithmic model [delta Ptp/delta V = A - B.log(t)] from 0.2 to 100 s, where delta V is the step volume change, A and B are coefficients, and t is time. A and B averaged 1.06 +/- 0.11 and 0.173 +/- 0.019 cmH2O/ml, respectively, with minor differences between stress relaxation and stress recovery curves. The response to sinusoidal forcing was characterized by the effective resistance (Re) and elastance (EL). Re decreased from 2.48 +/- 0.41 cmH2O.ml-1.s at 0.01 Hz to 0.18 +/- 0.03 cmH2O.ml-1.s at 0.5 Hz, and EL increased from 0.99 +/- 0.10 to 1.26 +/- 0.20 cmH2O/ml on the same frequency range. These data were analyzed with the frequency-domain version of the same model, complemented by a Newtonian resistance (R) to account for airway resistance: Re = R + B/ (9.2f) and EL = A + 0.25B + B . log 2 pi f, where f is the frequency.(ABSTRACT TRUNCATED AT 250 WORDS)

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call