Abstract

This research investigates strength development and the carbon footprint of Calcium Carbide Residue (CCR) and Fly Ash (FA) based geopolymer stabilized marine clay. Coode Island Silt (CIS), a soft and highly compressible marine clay present in Melbourne, Australia was investigated for stabilization with the CCR and FA geopolymers. CCR is an industrial by-product obtained from acetylene gas production, high in Ca(OH)2 and was used as a green additive to improve strength of the FA based geopolymer binder. The liquid alkaline activator used was a mixture of sodium silicate solution (Na2SiO3) and sodium hydroxide (NaOH). The influential factors studied for the geopolymerization process were Na2SiO3/NaOH ratio, NaOH concentration, L/FA ratio, initial water content, FA content, CCR content, curing temperature and curing time. The strength of stabilized CIS was found to be strongly dependent upon FA content and NaOH concentration. The optimal ingredient providing the highest strength was found to be dependent on water content. Higher water contents were found to dilute the NaOH concentration, hence the optimal L/FA increases and the optimal Na2SiO3/NaOH decreases as the water content present in the clay increases. The maximum strength of the FA geopolymer (without CCR) stabilized CIS was found at Na2SiO3/NaOH=70:30 ratio and L/FA=1.0 for clay water content at liquid limit (LL). The role of CCR on the strength of FA geopolymer stabilized CIS can be classified into three zones: inactive, active and quasi-inert. The active zone where CCR content is between 7% and 12% is recommended in practice. The 12% CCR addition can improve up to 1.5 times the strength of the FA geopolymer. The carbon footprints of the geopolymer stabilized soils were approximately 22%, 23% and 43% lower than those of cement stabilized soil at the same strengths of 400kPa, 600kPa and 800kPa. The reduction in carbon footprints at high strength indicates the effectiveness of FA geopolymer as an alternative and effective green soil stabilizer to traditional Portland cement.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call