Abstract
The cold work from the manufacturing process of cold-formed steel members can enhance the strength but reduce the ductility of materials. Due to a high cost of stainless steels, it is desirable to utilize this enhanced strength and avoid the early fracture in cold-formed stainless steel members. The paper is concerned with the prediction of the enhanced stress–strain behaviour and reduced ductility of corner materials in cold-formed stainless steel sections. The enhanced strength of corner materials has been traditionally determined using empirical models. However, most of these empirical models are only able to predict the enhanced 0.2% proof strength, but are neither capable of predicting the enhanced ultimate strength nor able to determine the reduced ductility. This paper first presents a modified weighted-average method for predicting the post-ultimate stress–strain behaviour and the fracture strain for stainless steels. An advanced numerical approach is next presented for predicting the full-range stress–strain behaviour of corner materials in cold-formed stainless steel sections, in which the modified weighted-average method is incorporated. The accuracy of this approach is demonstrated by comparing its predictions with test results. The proposed approach is generally applicable to cold-worked materials for predicting their enhanced strength, reduced ductility and full-range stress–strain behaviour. The proposed method and numerical results can explain why and how the ultimate strength of cold-formed steels can be increased and how the post-ultimate stress–strain behaviour can be utilized through cold working.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.