Stratified structure of membrane clogs observed in full scale cross-flow tubular ultrafiltration (UF) system: Fouling characterization and a proposed two-stage formation mechanism

Abstract

Membrane fouling remains a significant challenge in wastewater treatment, hindering both efficiency and lifespan. This study reports a distinct phenomenon of stratified membrane clogging observed in a full-scale cross-flow tubular ultrafiltration (UF) system treating sludge anaerobic digestion (AD) reject water. The distinct stratified structure, comprising inner and outer layers within the cake layer, has not been previously described. This research involved characterizing the filtration performance, analyzing membrane clog composition, and proposing a two-stage formation mechanism for the stratified clogs. It was revealed that higher inorganic and lower organic content in the outer layer compared to the inner layer. Acid and alkali treatments demonstrated the effectiveness of combined cleaning strategies. A mathematical model was developed to determine the critical conditions for stratified clog formation, influenced by membrane flux and cross-flow velocity (CFV). It is proposed that outer layer forms through long-term selective deposition, while the inner layer results from short-term dewatering within limited tubular space. High CFV (>2.5 m/s) prevents inner layer formation. Critical conditions for stratification occur at a flux of 18 L/m2/h with a CFV of 0.1 m/s or 65 L/m2/h with a CFV of 0.35 m/s. This study contributes a novel understanding of stratified membrane clogging, proposing a two-stage formation mechanism and identifying critical conditions, which provides insights for effective fouling control strategies and maintenance of operational efficiency for membrane systems.