Steam reforming of toluene as model biomass tar to H2-rich syngas in a DBD plasma-catalytic system

Abstract

Biomass tar is one of the most troublesome issues limiting the further development of biomass pyrolysis and gasification. In this study, a plasma enhanced catalytic steam reforming technology was applied for biomass tar removal. Toluene was selected as biomass tar surrogate. The nano-sized alumina-supported nickel and iron catalysts with different molar ratios of M/Al (M: Ni or Fe, 0:1, 1:3, 1:1, 3:1, 1:0) were prepared for catalytic steam reforming of toluene in a non-thermal plasma reactor featuring dielectric barrier discharge (DBD). The results showed that syngas was the dominant gas product of toluene decomposition. The conversion efficiency of toluene and energy efficiency using Ni-Al and Fe-Al catalysts both followed a sequence: M1Al3 > M1Al1 > M3Al1, which is in line with the BET surface area and pore volume. However, the selectivity of H2 and CO catalysed by Ni-Al and Fe-Al catalysts follows the order of M1Al3 < M1Al1 < M3Al1. Presumably, toluene dissociation is a process composed of adsorption-reaction-desorption. The formation of syngas is supposed to proceed as a series of ionic and free radical reactions occurring preferably in the gas phase. Ni1Al3 catalyst shows the largest potential in converting biomass tar into H2-rich syngas, with a maximum toluene conversion of 96% and a largest H2 yield of 2.18 mol/mol-toluene. Besides, the results showed that this hybrid plasma-catalysis system was potential in anti-carbon deposition.