Abstract
Summary Steam-assisted gravity drainage (SAGD) is being operated by several operators in Athabasca and Cold Lake reservoirs in Central and Northern Alberta, Canada. In this process, steam, injected into a horizontal well, flows outward, then contacts and loses its latent heat to bitumen at the edge of a depletion chamber. As a consequence, the viscosity of bitumen falls, its mobility rises, and it flows under gravity toward a horizontal production well located several meters below and parallel to the injection well. Despite many pilots and commercial operations, it remains unclear how to optimally operate SAGD. This is especially the case in reservoirs with a top-gas zone in which pilot data are nearly nonexistent. In this study, a steam-chamber operating strategy is determined that leads to optimum oil recovery for a minimum cumulative steam-to-oil ratio (SOR) in a top-gas reservoir. These findings were established from extensive reservoir-simulation runs that were based on a detailed geostatistically generated static reservoir model. The strategy devised uses a high initial chamber injection rate and pressure prior to chamber contact with the top gas. Subsequent to breakthrough of the chamber into the gas-cap zone, the chamber injection rates are lowered to balance pressures with the top gas and avoid (or at least minimize) convective heat losses of steam to the top-gas zone. The results are also analyzed by examining the energetics of SAGD.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have