Abstract
An orthogonal test was conducted to investigate the effect of hybrid fiber on the mechanical properties of ultra‐high performance concrete (UHPC‐CA) with coarse aggregate . It was used to design and manufacture 144 test specimens for compressive strength, flexural tensile strength, static compressive elastic modulus test, and SEM microscopic test. Considering the mass replacement rate of coarse aggregate (10%, 15%, 20%, and 30%), the steel fiber volume rate (0%, 0.5%, 1.0%, and 1.5%), and the polypropylene fiber volume rate (0%, 0.05%, 0.10%, and 0.15%). The results show that the volume fraction of steel fiber has the greatest impact on compressive strength and flexural tensile strength, followed by the mass substitution rate of coarse aggregate, and the volume fraction of polypropylene fiber has the smallest impact. For the elastic modulus under static compression, the mass substitution rate of coarse aggregate has the greatest impact, followed by the volume fraction of steel fiber and polypropylene fiber. Based on the analysis of compressive properties, flexural tensile properties, and elastic modulus, the optimal mix ratio is recommended as follows: coarse aggregate 15%, steel fiber 1.5%, and polypropylene fiber 0.10%. Finally, three kinds of strength parameters are predicted based on the back propagation (BP) neural network system. The absolute value of the relative error between the predicted strength and the experimental value is less than 5%, which indicates that the prediction model proposed in this paper can provide a reference for the multiobjective optimization of the mix proportion of hybrid fiber ultra‐high performance concrete.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.