Stagnant rings and uniform film analysis of Phan-Thien Tanner fluid film flow on a vertically upward moving tube

Abstract

Analyzing Phan-Thien Tanner fluid film behavior on a vertically upward moving tube can help predictive models in engineering, notably in coating and lubrication operations. This paper provides a theoretical analysis of the dynamics of stagnant rings and uniform Phan-Thien Tanner fluid film adhered to a vertically upward moving tube. Formulated ordinary differential equations are solved to get exact analytic expressions for velocity, flow rate, average velocity, shear stress components, and stagnant rings. Highly nonlinear algebraic equations are solved using Newton's method in MAPLE to find the linear and exponential Phan-Thien Tanner film thicknesses. The uniform film thickness widens with increasing constant tube velocity, while it decreases with increasing Deborah number, Stokes number, and elongation parameter. The analysis delineates that stagnant rings shrink around the tube as the Stokes number, Deborah number, and elongation parameter increase. The minimal Stokes condition for the existence of a realistic stagnant ring is also determined. It has been established that whenever the Stokes number is less than the minimal Stokes condition, stagnant rings do not form. A comparison between the exponential Phan-Thien Tanner, linear Phan-Thien Tanner, upper convected Maxwell, and Newtonian fluids is also provided for stagnant rings and fluid film thickness. Following the application of an efficient approximation on tube geometry, plate geometry is approximated, and the outcomes are consistent with existing literature. The results of this research are significant for a wide range of biofluid applications, including agrochemical uses, paint and surface coating flow behavior, thin films on the cornea and lungs, and chemical and nuclear reactor design.