Abstract
Zinc oxide nanotube arrays were prepared by hydrothermal reaction in ammonia and zinc chloride solutions, and the field emission properties were tested. The turn-on field of the field emission was extrapolated to be about 7.0V∕μm at a current density of 0.1μA∕cm2. Meanwhile, the emission current densities reached 1mA∕cm2 at a bias field of 17.8V∕μm. The field enhancement factor β was estimated to be 910. The field emission of the zinc oxide nanotubes showed good stability. The variation of emission current density was less than 10% during a 24h test under a field of 15V∕μm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
