Abstract

This study presents a groundbreaking exploration into the potential use of refractory tundish deskulling waste (TUN), a magnesium oxide-based by-product from continuous steel casting, as a stabilizing agent for remediating metal and metalloids contaminated soils. Up-flow column horizontal percolation tests were conducted to measure the concentrations of metals and metalloids, pH, and electrical conductivity (EC) in the leachates of two different combinations of contaminated soil and stabilizer (95–5 wt% and 90–10 wt%). The effectiveness of TUN as a soil-stabilizing agent for contaminated soils with metals and metalloids was evaluated by comparing its leachates with those obtained from a sample of a well-established low-grade magnesium oxide (LG-MgO) by-product, which underwent the same testing procedure.The findings revealed a significant correlation between the mobility of the examined metals and metalloids, and the water-soluble or acid phase of the contaminated soil, primarily governed by precipitation-solution reactions. While the stabilizing impact on non-pH-dependent metals, particularly redox-sensitive oxyanions, was less pronounced, both MgO-based stabilizers exhibited a favourable influence on soil pH-dependent metals and metalloids. They achieved this by establishing an optimal pH range of approximately 9.0–10.5, wherein the solubility of metal (hydr)oxides is minimized. Notably, metals like Zn and Cu, which have high leaching potential, experienced a remarkable reduction in leaching - Zn by over 99% and Cu by around 97% - regardless of the stabilizer content.In a broader context, this research champions the principles of the circular economy by offering a technical remedy for treating soils contaminated with pH-dependent metals and metalloids. The proposed solution harnesses industrial waste - currently relegated to landfills - as a resource, aligning with sustainable practices and environmental responsibility.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call