Stability performance of an Algerian Ni/purified diatomite catalyst in the dry reforming methane reaction: characterization and properties

Abstract

AbstractThis work aims to characterize and study the properties of an Algerian diatomaceous earth (Sig-Mascara) as a catalyst carrier. A commercial product of diatomite was characterized by granulometric analysis, X-ray fluorescence, X-ray diffraction, Fourier-transform infrared spectroscopy, thermogravimetric analysis/differential scanning calorimetry and scanning electron microscopy/energy-dispersive X-ray spectroscopy methods. To purify the diatomite and remove the impurities (iron oxides, clay minerals, quartz and organic matters), the <63 μm fraction of the diatomite was separated out. The 15Ni/Ds-700 catalyst has lower SiO2, Al2O3 and CaO contents compared with the original diatomite. The NiO content of the catalyst is 15 wt.%, indicating successful impregnation. According to the nitrogen sorption–desorption results, the specific surface area of the purified diatomite particles (<63 μm) increased from 26.47 to 46.33 m2 g–1 compared to crude diatomite. The 15Ni/Ds-700 catalyst was applied in the dry reforming of methane to obtain synthesis gas (CO and H2). The results showed that the catalyst was relatively stable during catalytic measurements for 6 h, although the conversion rate value was low (12%).