Abstract
The stability of alumina-pillared montmorillonite clays, prepared at various Al/clay ratios, was investigated by compaction at various pressures. The physical properties of the pillared clays, before and after compaction, were studied by powder XRD and nitrogen sorption. We found that the Al/clay ratio used to prepare the pillared clays (and therefore the resulting pillar density) is not a critical factor in determining the overall mechanical stability. However, pillared clays with a higher density were subject to greater decreases in textural properties (surface area and pore volume) after compaction. It was found that the pillared clays (regardless of pillar density) are generally stable up to ca. 5.7 tons cm-2. Mechanical pressure below 5.7 t cm-2 resulted only in small decreases in basal spacing, surface area, and pore volume. This was, however, accompanied by significant changes in the proportion of micropore surface area and pore volume. Compaction at a pressure of ca. 7.5 t cm-2 decreased the surfa...
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call