Stability evaluation of three-layered journal bearing with slip/partial slip

Abstract

PurposeThis paper aims to present stability of a three-layered journal bearing considering magnitude of the layers’ thicknesses and viscosities with slip/partial slip on the bearing surface.Design/methodology/approachModified Reynolds equation based on one-dimensional analysis is derived for a three-layered journal bearing with slip/partial slip. Dynamic coefficients are derived based on infinitesimal perturbation method. Linearized stability analysis is presented taking into account slip/partial slip on bearing surface; thicknesses and viscosities of bearing surface layer; and core layer and journal surface layer.FindingsResults of threshold speed and critical whirl frequency ratio coefficients (Cω, CΩ), stiffness (Kij for i = x,y) and damping (Bij for i = x, y) coefficients and threshold speed (ωs) and critical whirl frequency ratio (Ωs) are presented. The bearing surface is analyzed for slip (total surface with slip) and partial slip (partial surface with slip). The slip-on bearing surface reduces stability, while partial slip improves bearing stability. The threshold speed coefficient (Cω) decreases with slip on bearing surface. The threshold speed (ωs) and critical whirl frequency ratio (Ωs) are influenced by the variation of threshold speed coefficient (Cω) and critical whirl frequency ratio coefficient (CΩ), respectively. A three-layered journal bearing with partial slip and thick high viscosity bearing surface layer results in higher threshold speed coefficient and has a potential to improve stability of journal bearing. The analyses indicate that optimal angular extent of partial slip region (θs) enhances the stability of journal bearing.Originality/valueThe paper presents parametric study of stability coefficients (Cω and CΩ) and evaluation of threshold speed (ωs) and critical whirl frequency ratio (Ωs) of a three-layered journal bearing with slip/partial slip.