Stability Analysis of Composite Perforated Annular Sector Plates Under Thermomechanical Loading by Finite Element Method

Abstract

This paper presents the stability analysis of a perforated plate with sector geometry made of composite materials. The sector of concern is a compound of graphite-epoxy and glass-epoxy with identical ply thickness but different fiber angles for each layer. The mechanical load conditions considered include uniform axial, circumferential, and biaxial pressure, while the thermal loading is specified to be uniform temperature increase over the whole sector. The existence of one or two circular holes has increased the complexity of analysis. To obtain solutions of high accuracy, the three-dimensional elasticity theory relations have been employed. Using the finite element method along with the stability condition of Trefftz, the buckling equation of the structure is derived. Green nonlinear strain-displacement relations are used to form the geometrical stiffness matrix. Unlike the finite element method used by other researches, a novel curved 3D B-Splined element is used to more accurately trace the displacement and stress variations of the structure. This element can be used in solution domains with geometric discontinuities, such as perforated plates and also meshed in the thickness direction. Moreover, instead of using the common von Karman assumptions, the most general form of the strain tensors in the curvilinear coordinates is adopted. The buckling load is obtained by extremizing the second variations of the total potential energy. The finite element formulation is coded in the MATLAB software. The effects of various parameters such as sector dimensions, dimensions of the hole, mechanical load directions, and fiber angles of each layer on the thermomechanical buckling is investigated.