Abstract
This paper presents the findings from the field observation and site exploration for construction on peat in Sri Aman, Sarawak, Malaysia. A visit to Balai Bomba and Pejabat Metrologi in Sri Aman has been done in August 2019. From the observation and measurement conducted on the two locations of the constructed area on peat shows the settlement, δ recorded ranges from 100 mm to 150 mm. A field sampling for the determination of geotechnical properties of peat has been done in Balai Bomba Sri Aman. The depth of the peat in the area is about 2.88 m and the results show that the peat has high natural moisture content ranges from 900 % to 1400 %. The organic content (OC) for the site is in the range of 70 %-90 % for a depth of 0.5 m to 2.88 m, and categorized as H3, fibrous peat except for the first 0.5 m is 63 % which fall under H5, hemic peat group according to Von Post classification.
Highlights
Peat is extremely soft and defined as a non-homogeneous deposit of partially decomposed vegetative matter saturated with water and encountered in low-lying areas where the water table is near or above the ground surface [1]
This paper presents the findings from the field observation and site exploration for construction on peat in Sri Aman, Sarawak, Malaysia
A visit to Balai Bomba and Pejabat Metrologi in Sri Aman has been done in August 2019
Summary
Peat is extremely soft and defined as a non-homogeneous deposit of partially decomposed vegetative matter saturated with water and encountered in low-lying areas where the water table is near or above the ground surface [1]. Sri Aman peat: Settlement observation and geotechnical properties investigation 1101 012006 View the article online for updates and enhancements.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.