Abstract

Amorphous GdTbFeCo magnetic thin films were successfully prepared on glass substrates by RF magnetron sputtering system from a mosaic target. The influences of sputtering parameters on the magnetooptical properties GdTbFeCo thin film were investigated by the variable control method. And the influence mechanism was analyzed in detail. After the sputtering parameters were optimized, it was found that when the distance between target and substrate was 72 mm, the thin film thickness was 120 nm, and the sputtering power, sputtering pressure and sputtering time was 75 W, 0.5 Pa and 613 s, respectively, the coercivity with perpendicular anisotropy could be as high as 6735 Oe, and the squareness ratio of the hysteresis loop was almost equal to 1.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.