Speciation and Diffusivity of Hydrogen in Molten 2LiF-BeF2 for Nuclear Fission and Fusion Applications

Abstract

The behavior of hydrogen isotopes in molten 2LiF-BeF2 (FLiBe) is of interest to both advanced fission and fusion reactor designs. Tritium (hydrogen-3) is both a fission product and neutron activation product of lithium-6 fluoride in fission reactors which use FLiBe as a heat transfer fluid. In this case, tritium is an undesirable side product. In fusion reactors, FLiBe may be used as a blanket around the plasma which, upon neutron irradiation, generates tritium by the same neutron–Li-6 reaction. Here, tritium is a necessary and desirable product; the tritium is used to continuously fuel the deuterium-tritium fusion reaction. A thorough understanding of tritium’s behavior and residence time is relevant to managing tritium inventories in fission and fusion systems, which is essential for both the safety cases and functional operation of these reactors. Using hydrogen as a non-radioactive surrogate for tritium, we study the speciation and diffusivity of hydrogen in molten FLiBe at various temperatures relevant to reactor operating conditions.Here we present results of electrochemical investigations of hydrogen in FLiBe using cyclic and square wave voltammetry. We introduce hydrogen to FLiBe through 1) LiH additions and as 2) H2 gas, electrochemically desorbed from graphite. The expected solubility of H2 in FLiBe at 1 atm partial pressure is as low as 1 appm. Previous studies saw a higher apparent solubility of H2 at atmospheric pressure (up to 8000 appm). The possible presence of the postulated quasi-stable intermediate BeH2 is explored to explain the high apparent solubility of H2. The two methods of introducing H (as LiH reacting with BeF2 to form BeH2, which decomposes to H2, and the surface reduction of H2 on graphite) are compared to investigate the different species in which hydrogen may exist in molten FLiBe. Additionally, we attempt to quantify the diffusivity of these hydrogen species in FLiBe at 500ºC and 800ºC and compare findings with predicted diffusivities from computational models of Be and H additions to FLiBe. Overall, these studies seek to elucidate the speciation of hydrogen in FLiBe to aid in the management and operation of fission and fusion systems.