Spannungsanalyse einer anatomisch adaptierten Femurschaftprothese (Lubinus SPII)

Abstract

Very good clinical long-term results of the Lubinus SP II hip prosthesis stem were reported in the literature. We therefore asked whether there is a relationship between these findings with biomechanical data of strain gauge measurements. 14 strain gauges were applied at a femur being measured at 10 different load cases before and after implantation of the stem. After stem implantation a similar patterns of principal stress distributions was observed, however, the magnitude was markedly reduced. A striking reduction of the hoop stresses at the femoral calcar was seen in the case of a missing collar contact. Even in the case of a perfect collar contact the hoop stresses were diminished after strem implantation. The S-shaped physiological stem did not correspond with a specific stress pattern measured at the femoral surface. These results suggest that the stresses at the femoral calcar may be lower than the limits of bone growth while the other parts of the femur are more physiologically stressed. However, the prosthesis may tolerate a missing collar contact during a long follow-up period. The large experimental data file presented here could be used to validate future finite element analyses which could evaluate the stress distribution within internal parts of the bone and the cement layer.