Abstract

Ambient winds may lead to poor fan performance, exhaust air recirculation and mal-distribution of the air across the tube bundles of the air-cooled condensers in a power plant. Investigations of the impacts of the ambient winds on the air-cooled condensers are key area of focus. Based on a representative 2 × 600 MW direct dry cooling power plant, the physical and mathematical models of the air-side fluid and heat flow in the air-cooled condensers at various ambient wind speeds and directions are set up by introducing the radiator model to the fin-tube bundles. The volumetric flow rate, inlet air temperature and heat rejection for different air-cooled condensers as a whole, condenser cells and fin-tube bundles are obtained by using CFD simulation. The results show that the thermo-flow performances for the air-cooled condenser as a whole, condenser cells and heat exchanger bundles vary widely in space. The thermal performances of the air-cooled condensers, condenser cells and fin-tube bundles at the downstream are generally superior to those at the upwind. It is of use for the upwind fan regulations and the A-frame condenser cell geometric optimization to investigate the space characteristics of the thermal performance for the air-cooled condensers in a power plant.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.