Sources of noise exposure across Australian workplaces: cross-sectional analysis and modelling the impact of a targeted noise-source reduction initiative.

Abstract

Workplace noise regulations and guidance follow the hierarchy of control model that prioritizes eliminating or reducing noise at its source. To determine the main sources of workplace noise exposure in the Australian working population and estimate the reduction of workers exposed over the noise limit (LAeq,8h > 85 dB) if noise levels of specific tools or equipment were reduced by 10 dB. Information on the tools used and tasks performed during each participant's last working shift was collected from 4,977 workers via telephone survey. Using a predetermined database of task-based noise levels, partial noise exposures (Pa2h) were determined for each noisy activity performed by the workers and their daily noise exposure level (LAeq,8h) was estimated. Partial exposures were categorized into 15 tool/task groups and the tally, average, and sum (Pa2h) for each group were calculated. The impacts of 5 different scenarios that simulated a reduction of 10 dB in noise emissions for specific tool groups were modelled. Powered tools and equipment were responsible for 59.3% of all noise exposure (Pa2h); vehicles for 10.6%; mining, refineries, and plant equipment for 5.1%; and manufacturing and food processing for 4.2%. Modelling demonstrated that a 10 dBA noise-level reduction of all powered tools and equipment would lead to a 26.4% (95% confidence interval: 22.7% to 30.3%) reduction of workers with an LAeq,8h > 85 dB. This could represent over 350,000 Australian workers no longer exposed above the workplace limit daily. A universal reduction of 10 dB to power tools and equipment would substantially reduce the future burden of hearing loss, tinnitus, workplace injuries, and other health effects. Initiatives to reduce the noise emissions of specific powered tool groups are warranted.