Abstract
Chemical properties of unprocessed coconut husks varied significantly between 11 sources tested. The pH was significantly different between sources and ranged from 5.9 to 6.9. The electrical conductivities were significantly different between sources and ranged from 1.2 to 2.8 mS·cm–1. The levels of Na, K, P, and Cl were significantly different between sources and ranged from 23 to 88, 126 to 236, 8 to 33, and 304 to 704 ppm, respectively. The B, Cu, Fe, Ni, S, Zn, Mn, and Mo levels were all significantly different between sources and ranged from nondetectable levels to 12.7 ppm. The NH4-N, NO3-N, Ca, and Mg levels were not significantly different between sources and ranged from 0.2 to 1.8, 0.2 to 0.9, 2.9 to 7.3, and nondetectable to 4.6 ppm, respectively. Coir dust produced by screening of waste grade coir through 13-, 6-, or 3-mm screens had significantly different bulk densities, air-filled pore space, water filled pore space and water-holding capacities compared to nonscreened waste grade coir. However, total pore space and total solids were not significantly affected by screening. Screen size did not significantly affect physical properties. Compression pressures used for formation of coir dust blocks significantly affected physical properties. Additionally, coir dust age significantly affected chemical properties.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
