Sorption kinetics of parent and substituted PAHs for low-density polyethylene (LDPE): Determining their partition coefficients between LDPE and water (KLDPE) for passive sampling

Abstract

Low-density polyethylene (LDPE) has been widely used as a sorbent for passive sampling of hydrophobic organic contaminants (HOCs) in aquatic environments. However, it has seen only limited application in passive sampling for measurement of freely dissolved concentrations of parent and substituted PAHs (SPAHs), which are known to be toxic, mutagenic and carcinogenic. Here, the 16 priority PAHs and some typical PAHs were selected as target compounds and were simultaneously determined by gas chromatography–mass spectrometer (GC–MS). Some batch experiments were conducted in the laboratory to explore the adsorption kinetics of the target compounds in LDPE membranes. The results showed that both PAHs and SPAHs could reach equilibrium status within 19–38 days in sorption kinetic experiments. The coefficients of partitioning between LDPE film (50 μm thickness) and water (KLDPE) for the 16 priority PAHs were in good agreement with previously reported values, and the values of KLDPE for the 9 SPAHs are reported in this study for the first time. Significant linear relationships were observed, i.e., log KLDPE = 0.705 × log KOW + 1.534 for PAHs (R2 = 0.8361, p < 0.001) and log KLDPE = 0.458 × log KOW + 3.092 for SPAHs (R2 = 0.5609, p = 0.0077). The selected LDPE film was also proven to meet the condition of “zero sink” for the selected target compounds. These results could provide basic support for the configuration and in situ application of passive samplers.