Abstract
Sorption and degradation characteristics of epoxy composites reinforced with amine-coated polyester triangular bars in acid environment were studied. The following aspects of amine-coated triangular bars were varied during preparation of epoxy composites: orientation (flat or pointed), alignment (parallel or staggered), spacing (1 or 5 mm), and size (5 or 7 mm). Composites were tested using a one-side acid exposure test in 5 wt% hydrochloric (HCl) acid solution at 40°C for 308 h. Weight change curves of composites with pointed orientation show continuous sorption of acid solution with square root of time, while composites with flat orientation display an initial increase in weight followed by continuous weight loss. This can be attributed to the large interfacial area of triangular bars exposed to diffusing acid in flat orientation. Since the bars are amine-coated, the acid preferentially diffuses in the interfacial region, resulting to early degradation of composite. The following parameters were measured from the weight curves for data analysis: initial sorption rate (% - h-0.5), maximum weight change during sorption (%), and weight loss due to degradation (%). Analysis of variance (ANOVA) shows maximum weight change and weight loss due to degradation of epoxy composites are significantly affected by orientation and spacing.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call