Abstract
X'-band GaAs and Si IMPATT oscillators have been developed using a compact heat-sink cum waveguide cavity arrangement with diodes mounted between a resonant cap and the broad face of the waveguide. In the operating current range, tuned maximum power output and the efficiency at a given dc bias current are strongly dependent on the resonant cap diameter which mainly determines the frequency of oscillation. The maximum efficiency of the GaAs IMPATT oscillator was found to be 19% at a power level of 1.4 W when the device optimum frequency nearly corresponds to freq of oscillation determined by the resonant cap. On the other hand, the maximum efficiency considerably degrades with resultant decrease of tuned maximum power output when the oscillating frequency determined by the cap diameter appreciably differs from the frequency of maximum negative conductance of the diode. Similar investigations have been carried out on Si SDR IMPATT oscillators for various sizes of the resonant cap which show that the power output and efficiency peaks at an optimum size of the resonant cap for a given device.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
