Solution of the plane thermoelasticity problems based on a new set of equations

Abstract

The interaction of thermal and mechanical fields in modern technologies for the synthesis and processing of materials attracts more and more attention. This is due to the need to predict the behavior and properties of new materials and products depending on the conditions of their creation. In the present work, attention is focused on the comparison of the solutions to the thermoelasticity plane problems with and without accounting for the temperature dependence of the material properties. It is assumed that an external heat source traveling over the surface with a specific velocity and following a given trajectory is responsible for a significant temperature increase. It may correspond to a laser source, for example. The new way of problem formulation in stresses is used. The temperature dependence of the characteristics leads to nonlinear thermoelasticity equations when the equilibrium equations, the requirement of strain compatibility, and the Duhamel-Neuman relation for the plane stress state case are combined. To determine the temperature field, a nonlinear thermal conductivity equation is used. To solve the problem numerically, the use of an implicit finite-difference scheme and coordinate splitting for the thermal conductivity equation and the finite-difference method of successive over-relaxation with Chebyshev acceleration for the equations for stresses was made. As a result, the difference in the solution of linear and nonlinear problems is demonstrated for the considered cases. Using the example of a mixture of titanium and aluminum powders, numerical modeling demonstrated that some stress components can reach values up to 3.5 times higher than those obtained in the case of temperature-independent material properties when there is a 500-degree local temperature increase.