Abstract
Experimental solubilities of difluoromethane (R32) in polyol ester (POE), polyvinylether (PVE), and polyalkylene glycol (PAG) base oils were measured in the temperatures range from 273 K to 351 K based on the isochoric method. The experimental setup was checked by measuring the solubility of carbon dioxide in n-decane at pressures from 0.1 to 4.6 MPa. The expanded uncertainty (k = 2) of the measured solubility data was estimated to be less than 2.8%. The experimental solubility data were correlated using the Peng–Robinson (PR) equation of state (EOS) and Wilson activity coefficient model. The absolute average deviations of the experimental data and calculated values for R32 in POE, PVE, and PAG base oils were 1.74%, 0.73%, and 0.97%, respectively. The solubility of R32 in three base oil were calculated and compared at same temperatures and pressures, and the results showed that the solubility order of R32 in the three base oils was: PAG > PVE > POE.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
