Abstract
The solidification behavior (microsegregation, secondary phase formation, and solidification temperature range) of an Alloy 625 weld overlay deposited on 2.25Cr-1Mo steel by gas metal arc welding was investigated by light and electron optical microscopy, electron microprobe, and differential thermal analysis techniques. The overlay deposit was found to terminate solidification at {approx}1,216 C by a {gamma}/Laves eutectic-type reaction. The Laves phase was highly enriched in Nb, Mo, and Si. The solidification reaction and microsegregation potential of major alloying elements in the overlay deposit are compared to other Nb-bearing Ni base alloys and found to be very similar to those for Alloy 718. Solidification cracks observed in the overlay were attributed to the wide solidification temperature range ({approx}170 C) and formation of interdendritic ({gamma} + Laves) constituent. Reasonable agreement is obtained between the calculated and measured volume percent ({gamma} + Laves) constituent with the Scheil equation by treating the overlay system as a simple {gamma}-Nb binary and using an experimentally determined k{sub Nb} value from electron microprobe data.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have