Abstract
A solidification microstructure selection diagram has been determined for ZnAl alloys containing 2–10 wt% Al by Bridgman and TIG weld traversing over the growth velocity range 0.01–21 mm/s. Secondary dendrite arm spacings λ 2 of αZn and βAl decreased with increasing V such that λ 2V 1 3 is constant at fixed alloy concentration. Eutectic cell size Λ decreased with increasing V such that ΛV 1 2 is constant at 690 ± 130 μ m 3 2 s −1 2 . Eutectic interphase spacing λ decreased with increasing V such that λV 1 2 is constant at 7.1 ± 0.8 μ m 3 2 s −1 2 over the growth velocity range 0.01–21 mm/s in excellent agreement with predictions of the Jackson-Hunt model. Hardness of the eutectic exhibited a Hall-Petch relationship with eutectic interphase spacing λ and eutectic cell size Λ. The value of k y from the eutectic interphase spacing is intermediate in value between those for grain size hardening of the pure constituents.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.