Abstract

Pharmaceutical consumption is increasing worldwide as it is essential to treat and prevent health issues but they end up in the environment. However, in many African countries like Ethiopia, the status of these compounds in various environmental samples is not very well known. In this study, a simple method for the extraction and determination of thirteen pharmaceutical compounds of different therapeutic classes in water samples using solid-phase extraction and HPLC-DAD was developed. Different parameters affecting extraction were optimised and obtained as hydrophilic-lipophilic balance (HLB) extraction cartridge, water sample pH of 5, elution solvent of 2% formic acid in water with methanol (20:80%, v/v), a sample volume of 150mL and addition of 0.5% w/v EDTA in the sample. The limits of detection and quantification of the optimised method were in the range of 0.1-0.8µg/L and 0.2-2.6µg/L, respectively. The relative recovery in the spiked environmental water sample was in the range of 70-117% except for amoxicillin and acetylsalicylic acid in influent wastewater. The precision for all ranged from 0.3 to 11%. The proposed method was successfully tested for the detection and quantification of different environmental water samples collected from Addis Ababa, Ethiopia. Trimethoprim, caffeine and albendazole concentrations of 7.8 (1.1), 3.2 (0.4) and 2.1 (0.1) µg/L were quantified in hospital wastewater, respectively. The concentration of norfloxacin was found to be below the limit of quantification in the same water. Trimethoprim and ciprofloxacin were also found in the sewage treatment plant influent sample at a concentration of 0.5 (0.02) and 0.3 (0.01) µg/L, respectively.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call