Solar PV vacuum glazing (SVG) insulated building facades: Thermal and electrical performances

Abstract

As fire emergencies and energy saving demand of buildings have grown around the globe, concerns have been raised about the flammability of conventional external insulation materials in cold weather areas. In this paper, solar PV vacuum glazing (SVG) was proposed as a promising alternative to traditional external insulation layers of buildings due to its incombustible nature and superior thermal insulation performance. To assess the thermal and electrical performances of SVG-insulated facades, a heat transfer model and an effective absorptance calculation model for SVG-insulated façades were developed and validated against experimental data. Results showed that SVG-insulated facades exhibited significantly lower U values, ranging from 44.1% to 47.5% less than those of traditional concrete walls (without insulation layer). Additionally, the application of Low-emissivity (Low-e) coatings on the glazing could further reduce the U value from 2.05 W/(m2·K) to 0.647 W/(m2·K), making SVG-insulated facades competitive with traditional insulation walls. The secondary heat transfer factor (SHTF), defined as the ratio of indoor heat gain from solar radiation absorbed by building facades to incident solar radiation, was also reported for SVG-insulated facades with different solar cells (C-si, A-si, and CdTe), along with their respective efficiencies. Parametric analyses of eight parameters subsequently highlighted that their influence on the thermal performance of SVG-insulated façades was much greater than on the solar cell efficiency. Furthermore, considering the combined effect of optimal value of key influencing parameters, the lowest U value of 0.153 W/(m2·K) could be achieved, which represents approximately 24.6% of the U value of traditional insulation walls. This study provides compelling evidence for the adoption of SVG-insulated facades as replacements for traditional insulation walls and offers insights into optimizing their thermal performance.