Soil element assessment of cyclic-load-induced settlement considering combination of vertical, horizontal, and shear stresses in cohesive soil

Abstract

Grounds subjected to cyclic loading, either continuous or fragmentary, widely exist in natural deposits and at reclaimed sites, e.g., induced by traffic loads, earthquakes, and wave-induced loading environments. Assessing the ground deformation under cyclic loading conditions is necessary for proper design and maintenance planning for traffic services. Accordingly, a testing program, in which vertical, horizontal, and shear stresses are automatically controlled, were newly developed in this study to reproduce the actual cyclic traffic load conditions using a hollow-cylindrical torsional shear apparatus.Estimations based on the results obtained from cyclic triaxial stress conditions were seen to underestimate the ground settlement compared to actual stresses, with combined vertical, horizontal, and shear stresses. Two kinds of vertical strain arose after a certain number of cycles: incremental collapse, in which unstable deformation (failure) is caused, and plastic creep, in which deformation continues to accumulate with the dampened rate (per cycle). The number of cycles of combined vertical, horizontal, and shear stresses necessary to reach a certain vertical strain increased linearly on a logarithmic scale when the magnitude of loading decreased. Moreover, the relationship between vertical strain and excess pore water pressure presented the same trend independent of the magnitude of loading. Practical uses of the obtained results were proposed and discussed.