Sodium-based no-core fiber surface plasmon resonance sensor with high sensitivity and narrow FWHM

Abstract

Since fiber-optic sensors using noble metal-excited surface plasmon resonance (SPR) effects have encountered bottlenecks in improving performance, we propose a fiber-optic sensor using sodium in combination with a no-core fiber (NCF) to measure both refractive index (RI) and temperature. We deposited sodium thin films on the surface of NCF optical fibers and protected them with polymethyl methacrylate (PMMA) or polydimethylsiloxane (PDMS) for RI sensing or temperature sensing. We performed computational simulations and performance analyses of the sensors using the finite element method, and the results show that the sodium-based SPR sensors have higher sensitivity, wider detection range, and narrower full width at half-maximum (FWHM) than the noble metal SPR sensors. SPR sensors with different sodium film thicknesses have different sensing characteristics, so we can get optical fiber sensors with more flexible transmission characteristics, which helps us arrange sensors more conveniently in practical applications. The simulation and numerical results show that when the sensor is used to measure RI, the average sensitivity of the sensor can reach 7977 nm RIU−1, the maximum sensitivity can reach 23100 nm RIU−1, the narrowest FWHM is 14.23 nm, and the maximum figure of merit (FOM) is 719.42 RIU−1 under different thicknesses of sodium film. The corresponding RI ranges from 1.32 to 1.41. When the temperature measurement range is 0 °C ∼ 100 °C, the average sensitivity can reach 7.86 nm °C−1, the maximum temperature sensitivity can reach 21.1 nm °C−1, and the narrowest FWHM is 17.84 nm. In summary, the proposed sodium-based SPR sensor has flexible and high-performance sensing characteristics, and our research work provides more powerful theoretical support for the application of sodium-based plasma devices.