Abstract

Wind energy has been developed and is widely used as a clean and renewable form of energy. Among the existing variety of wind turbines, variable-speed variable-pitch wind turbines have become popular owing to their variable output power capability. In this study, a hybrid control strategy is proposed to implement pitch angle control. A new nonlinear hybrid control approach based on the Adaptive Neuro-Fuzzy Inference System and fuzzy logic control is proposed to regulate the pitch angle and maintain the captured mechanical energy at the rated value. In the controller, the reference value of the pitch angle is predicted by the Adaptive Neuro-Fuzzy Inference System according to the wind speed and the blade tip speed ratio. A proposed fuzzy logic controller provides feedback based on the captured power to modify the pitch angle in real time. The effectiveness of the proposed hybrid pitch angle control method was verified on a 5 MW offshore wind turbine under two different wind conditions using MATLAB/Simulink. The simulation results showed that fluctuations in rotor speed were dramatically mitigated, and the captured mechanical power was always near the rated value as compared with the performance when using the Adaptive Neuro-Fuzzy Inference System alone. The variation rate of power was 0.18% when the proposed controller was employed, whereas it was 2.93% when only an Adaptive Neuro-Fuzzy Inference System was used.

Highlights

  • Over the past decades, wind energy has become a popular clean and renewable form of energy (GWEC, 2021; Tian et al, 2021)

  • When the wind speed is higher than the rated value but lower than the cutout value, the rated power is maintained by an applied pitch controller to ensure the safety of wind turbine components

  • Hybrid pitch angle controller based on Adaptive Neuro-Fuzzy Inference System (ANFIS) and fuzzy logic control

Read more

Summary

Introduction

Wind energy has become a popular clean and renewable form of energy (GWEC, 2021; Tian et al, 2021). ANFIS can automatically generate fuzzy if- rules and optimize turbine parameters via the learning capability of an ANN, and has been primarily used to predict the power coefficient of a wind turbine and to estimate the wind speed (Fan and Mu, 2020; Marugan et al, 2018). A fuzzy logic controller is adopted to compensate for the nonlinear relationship between pitch angle and wind speed, in which the output power error and its derivative were chosen as the input variables. Where JPel and Jgen are the equivalent rotational inertias of the Pelton wheel and generator, respectively; BPel is the damping constant of the Pelton turbine output shaft; Tgen is the generator torque; and TPel and ωPel are the torque and angular speed of the Pelton turbine output shaft, respectively

Method
Design of ANFIS
Findings
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call