Smartphone-assisted colorimetric dual-mode sensing system based on europium-doped metal–organic frameworks for rapid on-site visual detection of Fe3+ and doxycycline

Abstract

Exploring a rapid, sensitive, low-cost, in-situ intelligent monitoring multi-target fluorescence detection platform is important for food safety and environmental monitoring. A dual-mode ratiometric fluorescence sensing system integrated with a smartphone based on a luminescent metal–organic framework (NH2-MIL-53) and CdTe/Eu was developed for visual, in-situ analysis of Fe3+ and doxycycline (DOX) in this paper. Interestingly, with increasing Fe3+ concentration, the fluorescence sensing system exhibits dual-emission with CdTe QDs at 540 nM as the response signal and NH2-MIL-53 at 438 nm as the reference signal, resulting in a significant color shift of fluorescence color from blue-green to blue, with a linear range of 5––1550 nM and a detection limit of 1.08 nM. In the presence of DOX, the blue fluorescence of NH2-MIL-53 and the green fluorescence of CdTe QDs were quenched respectively by the internal filtering effect and the photoelectron transfer effect. While DOX enhances the red fluorescence of Eu3+ by the antenna effect, forming a triple-emission fluorescence sensor. The visual color of this fluorescent sensor shifted from blue green to grey to pink-white to pink to fuchsia to red as the DOX concentration increased with a detection limit of 0.11 nM. Furthermore, the developed intelligent sensing platform achieved real-time in-situ detection of Fe3+ and DOX with detection limit of 1.47 nM and 6.43 nM, respectively. The platform was applied to detection actual samples with satisfactory results, which proved a promising application for real-time on-site food safety monitoring and human health monitoring.