Smart Manufacturing in Rolling Process Based on Thermal Safety Monitoring by Fiber Optics Sensors Equipping Mill Bearings

Abstract

The steel rolling process is critical for safety and maintenance because of loading and thermal operating conditions. Machinery condition monitoring (MCM) increases the system’s safety, preventing the risk of fire, failure, and rupture. Equipping the mill bearings with sensors allows monitoring of the system in service and controls the heating of mill components. Fiber optic sensors detect loading condition, vibration, and irregular heating. In several systems, access to machinery is rather limited. Therefore, this paper preliminarily investigates how fiber optics can be effectively embedded within the mill cage to set up a smart manufacturing system. The fiber Bragg gratings (FBG) technology allows embedding sensors inside the pins of backup bearings and performing some prognosis and diagnosis activities. The study starts from the rolling mill layout and defines its accessibility, considering some real industrial cases. Testing of an FBG sensor prototype checks thermal monitoring capability inside a closed cavity, obtained on the surface of either the fixed pin of the backup bearing or the stator surrounding the outer ring. Results encourage the development of the whole prototype of the MCM system to be tested on a real mill cage in full operation.