Abstract
Lattice structures are a group of cellular materials composed of regular repeating unit cells. Due to their extraordinary mechanical properties, such as specific mechanical strength, ultra-low density, negative Poisson's ratio, etc., lattice structures have been widely applied in the fields of aviation and aerospace, medical devices, architecture, and automobiles. Hybrid additive manufacturing (HAM), an integrated manufacturing technology of 3D printing processes and other complementary processes, is becoming a competent candidate for conveniently delivering lattice structures with multifunctionalities, not just mechanical aspects. This work proposes a HAM technology that combines vat photopolymerization (VPP) and electroless plating process to fabricate smart metal-coated lattice structures. VPP 3D printing process is applied to create a highly precise polymer lattice structure, and thereafter electroless plating is conducted to deposit a thin layer of metal, which could be used as a resistive sensor for monitoring the mechanical loading on the structure. Ni-P layer and copper layer were successfully obtained with the resistivity of 8.2×10-7Ω⋅m and 2.0 ×10-8 Ω⋅m, respectively. Smart lattice structures with force-loading self-sensing functionality are fabricated to prove the feasibility of this HAM technology for fabricating multifunctional polymer-metal lattice composites.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.