Abstract

A limited number of studies are available in literature on the small bubbles which create from gas-very high viscosity oils interaction and its contribution to the gas holdup in the system. The rate of small bubble formation has an important impact on heat and mass transfer in many chemical and industrial processes. The work presented in the current paper provides unique information on the formation of bubbles of millimetre diameter in high viscosity oil. A column of 290 mm diameter and Silicon oil of 330 Pa.s viscosity, were employed besides Electrical Capacitance Tomography and a high-resolution camera to investigate the characteristics of the small bubbles. Mechanism of bubble generation, effect of gas injection time and flowrate were studied. The average void fraction, total gas-liquid height, overall Probability Density Function (PDF) profile, small bubbles volume fractions and diameter were measured. Small bubbles generate from the eruption of large bubbles, at gas injection nozzles, coalescence of large bubbles, and at liquid bridges at transition to churn flow regime. Properties and concentration of the small bubbles are controlled by the location of the bubble generation, gas flowrate, and gas injection time. Small bubbles contribute by 6.6- 30% to the total gas holdup. Bubble diameter increased from 0.68 mm to 0.75 mm and decreased from 1.1 mm to 0.75 mm at the top and the bottom sections of the column respectively after 60 minof gas injection.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call