Abstract
In this paper, the effects of specimen size and geometry on the apparent mode I fracture toughness (K c) of an Iranian white marble (Neyriz) are studied. A number of fracture tests were conducted on center-cracked circular disk (CCCD) specimens with different radii to investigate the size effects on K c. The experimental results demonstrate that the apparent fracture toughness increases in bigger specimens. In order to explain the experimental results, the modified maximum tangential stress (MMTS) criterion is used, where higher order terms of the Williams’ series expansion are included in the maximum tangential stress criterion. It is shown that the MMTS criterion provides good estimates for the apparent fracture toughness of Neyriz marble, obtained from fracture tests of edge-cracked triangular specimens. It is, therefore, concluded that the proposed criterion is able to account for the size and geometry effects on the fracture resistance of rocks simultaneously.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have