Site effect on seismic response of buried nuclear power plant structure

Abstract

The development of multifunctional, multipurpose small modular next generation nuclear reactors has become a trend in designing small-scale nuclear power stations. In this study, taking a new next-generation buried nuclear power structure as the target structure, a 3D finite element model of the site-nuclear power plant structure system was established, and its response at different sites was studied. Using the internal substructure method, this study initially explored the impact of earthquake input and artificial boundary locations on the structural response. The results indicate that the internal substructure method enhances computational efficiency without compromising accuracy. For this model, it is recommended to input earthquake motion close to the structure, set the lateral boundary location to three times the width of the structure, and set the bottom boundary location to two times the depth of the structure. Subsequently, an investigation into the response of the structure at varying site wave velocities is conducted. The results show that as the wave velocity increases, the acceleration response intensifies, while the displacement response diminishes. However, the relationship is nonlinear; the response exhibits less variation with increasing site wave velocity. The seismic response of a structure is profoundly influenced by site conditions, emphasizing the imperative need for careful consideration of specific site characteristics in seismic analyses. In addition, the response pattern of the overall structure is significantly different from that of conventional large surface-sited nuclear power plants, and further research should be conducted on the seismic response characteristics of buried nuclear power plants.