Abstract
A single-layer differential-fed (DF) wideband metasurface (MTS) antenna is proposed in this paper. As the prototype, a three-by-three MTS formed by identical rectangular patches is investigated at first. We observe that there are many unwanted higher-order modes (HOMs) resonating near the wanted fundamental mode. Two probes with differential signals feed MTS on its centerline to suppress the majority of HOMs. The remaining HOM can be removed from the discussed frequency range by modifying the prototype MTS to a nonuniform structure. Then, the optimal feeding positions (FPs) are determined by a quantitative prediction of the impendence bandwidth (IBW) without any physical feeds involved. The processes of HOMs suppression and FPs determination are based on characteristic mode analysis with the virtual probes. Moreover, two interdigital capacitor plates are loaded on the probes to improve the impedance matching of the antenna. Finally, the proposed DF MTS antenna is fabricated and measured. The measured −10-dB IBW is 18.4% (4.93 to 5.93 GHz) with broadside radiation, stable high gains, and front-to-back ratios better than 21 dB.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
