Abstract

In recent years, high-energy single-axial-mode Q-switched lasers have been widely studied and applied because of their wide applications such as in nonlinear optics, laser spectroscopy and light detection and ranging (LIDAR). Many applications require a Q-switched pulse that has not only single axial mode but also can be synchronized with an external system. But two most commonly used methods (the build-up time reducing technique and ramp fire technique) are difficult to achieve single-axial mode operation. In this work, we apply the ramp-hold-fire technique to an injection-seeded Nd:YAG laser. The slave oscillator is a self-filtering unstable resonator (SFUR). The SFUR oscillator can achieve a smooth spatial profile TEM<sub>00</sub> transverse mode. An RTP electro-optical crystal is adopted for intracavity phase modulator to modify the effective optical path length of the slave oscillator cavity. The seed-injection locking is realized by the ramp-hold-fire technique. The laser driver generates a pumping pulse. After a suitable time delay the driver is fired, a linear ramp voltage is applied to the RTP crystal. A photodiode detector monitors the interference signal. As soon as the interference peak is detected, the controlling electronics produces a stop signal. The ramp voltage on the RTP crystal is stopped and held at a fixed value. Then the Q-switch is fired at a set time, and finally single axial mode laser is demonstrated. Combining the advantages of intracavity phase modulation and Q-switch exact synchronization of the ramp hold fire technique, we obtain a narrow linewidth single-axial-mode laser pulse with precisely controllable output time. The laser is capable of generating 1064 nm pulse energy large than 50 mJ. The pulse build-up time is reduced by 31 ns to 48 ns. The pulse firing time is precisely controlled with jitter less than 1%. Then the frequency spectrum of the 1064 nm laser is measured with a commercial Fizeau wavemeter HighFinesse WS7. The multi-beam interference patterns of the pulse are shown to be smooth in the wavemeter. The wavelength is measured to be 1064.40416 nm and the linewidth is less than 0.5 pm which is limited by the instrument resolution. Meanwhile, the frequency stability is measured to be less than 0.1 pm (V-V) over 1700 pulses with a working frequency of 0.1 Hz.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.